You are not logged in.

#1 2023-05-15 17:57:21

JeanLouis_Reboul
Member
From: Ajaccio (France-Corsica)
Registered: 2019-10-03
Posts: 5

about the motorisations for Victoria 30

Hello,
I have a big problem with my Victoria 30 : it is fitted with a Vetus M310 engine, which is for the present out of order. I have been told that the Victoria  was originally proposed with different engines in 10 to 30 HP. Have anybody any information or experience about this ? Thanks for your help.
jlreboul@hotmail.fr, 33-06 811 00 693


Lutin d'Altaïr

Offline

#2 2023-05-15 20:56:31

Simon_Dewing
Member
From: Torquay / Texas
Registered: 2022-08-04
Posts: 57

Re: about the motorisations for Victoria 30

JeanLouis,

My (1983) V30 is fitted with it's original engine a Yanmar 2GM20F.

I read somewhere (probably in the manual or in an early write up) that the basic installation was the raw water cooled 2GM20 but all the others I have seen (unless re-engined) have been similar and have had the freshwater cooled 2GM20F.

1684180387_sabbatical_refit_373jpg.jpg

Later Yanmar's and Beta 20Hp diesels seem popular choices for those that have been reengined.

Most F26/V26's seem to have had the Yanmar 1GM10 raw water cooled diesel when new.
I also have an F26 which was reengined witha Beta 16HP freshwater cooled diesel.

1684180538_engine.png

Simon

Offline

#3 2023-05-20 16:56:51

JeanLouis_Reboul
Member
From: Ajaccio (France-Corsica)
Registered: 2019-10-03
Posts: 5

Re: about the motorisations for Victoria 30

Merci de ta réponse. Pourrais-tu m'indiquer quel est le rapport de réduction et d'inverseur ?


Lutin d'Altaïr

Offline

#4 2023-10-30 15:42:13

Colin_Reid
Member
From: Gloucestershire
Registered: 2003-11-02
Posts: 36

Re: about the motorisations for Victoria 30

I fitted a new engine when the Yanmar was getting a bit ancient. Nanni D21 which you should get easily in France. The same Kabuto block as the Beta. Very happy with it although its a tight fit.

Offline

Board footer

Powered by FluxBB