You are not logged in.

#1 2022-09-15 16:08:33

Ian_Abbott
Member
Registered: 2021-12-17
Posts: 16

Standing rigging tension V30

Does anyone have recommended values for the standing rigging tension on a V30. My Backstay Forestay and cap shrouds are 7mm my inner shrouds 6mm.

Offline

#2 2022-10-17 14:30:17

Colin_Reid
Member
From: Gloucestershire
Registered: 2003-11-02
Posts: 37

Re: Standing rigging tension V30

Not very scientific, but I read that the standing rigging should be as tight as you can get it with a hand tool, and that is is impossible to over tighten by hand. Not using a long lever of course, just a screwdriver or similar. That's what I do when tuning the rigging. I think its in a slim book I have on rig tuning, I could try to dig it out if you want. The danger is from rigging that is too slack as it allows snatch loads.

Offline

Board footer

Powered by FluxBB