#1 2021-11-02 19:14:46

Murray_Fraser
Member
From: Weymouth
Registered: 2016-11-22
Posts: 23

Holding tank for V800

Can anyone advise on fitting a holding tank?  I reckon it will shortly become a requirement in the Solent and possibly other congested areas. My heads is aft to Starboard and there is a shallow wet locker on the aft bulkhead which looks ideal if a bit tight, especially as the waste out seacock is at the bottom of the wet locker and I am struggling to find a tank to fit.

Last edited by Murray_Fraser (2021-11-03 22:44:40)


VICTORIA 800 Dulcibella

Offline

#2 2021-11-13 10:07:49

Duncan_Hill
Committee Member
From: Dun Laoghaire, Ireland
Registered: 2017-03-14
Posts: 112
Website

Re: Holding tank for V800

I can't advise on a V800, but I can at least suggest that Tek Tanks might be a starting point for getting a holding tank that fits the boat (there are probably alternatives, but TT is the one I'm aware of).


Blue Opal, Victoria 34

Offline

#3 2021-11-14 01:42:18

Murray_Fraser
Member
From: Weymouth
Registered: 2016-11-22
Posts: 23

Re: Holding tank for V800

Thanks Duncan, I looked at TT and their smallest vertical gravity might fit in my heads wet locker but would prevent access to the outlet stopcock.  Same goes for Jabsco and Vetus.  Also fitting a vent looks impossible.  There would have been space in starboard cockpit ocker but I already have my hot water tank in there on the bulkhead.  I am hoping someone out there with a V26/F26 or V800 with aft heads has achieved what looks to be a real challenge!


VICTORIA 800 Dulcibella

Offline

#4 2021-11-15 11:45:30

Jonathan_Hopper
Member
Registered: 2004-03-23
Posts: 122

Re: Holding tank for V800

RM69 do a 25l buffer tank which fits around the pan - https://www.rm69.nl/buffertank/

Not aware that Jabsco make similar.

No idea how well it works in practice.

Offline

Board footer

Powered by FluxBB