#1 2021-10-07 22:51:56

Murray_Fraser
Member
From: Weymouth
Registered: 2016-11-22
Posts: 16

Pushpit arch

I have a solar panel about 50cm square that sits on a small arch about 60cm in width and 30cm high that is bolted onto the top pushpit bar.  However it creates a hazard as the edges of the panel protrude into the stern seating connecting far too frequently with my head!  I want to fit a higher arch that will also take my GPS and AIS aerial.  It does not need to take radar so I am just looking to bolt something to the top of the pushpit.  Can anyone recommend a source to purchase or recommend a diy solution?


VICTORIA 800 Dulcibella

Offline

#2 2021-10-08 18:12:16

Ken_Davidson
Member
Registered: 2020-07-27
Posts: 9

Re: Pushpit arch

I have the same problem so will be interested in any helpful replies you get. My 10w panel is bolted to the top of the pushpit. It’s to low to use if I ventured far offshore.

Offline

#3 Yesterday 17:41:06

Murray_Fraser
Member
From: Weymouth
Registered: 2016-11-22
Posts: 16

Re: Pushpit arch

I have come up with a possible design for my extended arch.  Comments welcome.  I have a fabricator in Weymouth who has done some other work for me so barring comments I will go and see him for costs etc.  Raised-Pushpit.pdf


VICTORIA 800 Dulcibella

Offline

Board footer

Powered by FluxBB