#1 2021-08-02 16:44:04

Tim_Aspden
Member
From: Dartmouth, Devon
Registered: 2021-05-22
Posts: 6

Sail Dimensions Victoria 30

Can anyone tell me the sail dimensions of the Victoria 30 please. I need the I, J, P, E lengths in order to obtain quotes for new sails on my boat.

Thanks you

Tim

Offline

#2 2021-08-15 22:41:55

Allan_Poulter
Member
Registered: 2021-06-21
Posts: 10

Re: Sail Dimensions Victoria 30

I have the mast out on mine at the moment. I will do some measurements this week.

Offline

#3 2021-08-25 22:27:14

Allan_Poulter
Member
Registered: 2021-06-21
Posts: 10

Re: Sail Dimensions Victoria 30

Tim I took some measurements today. Pin to pin my forestay is 37ft 4inches.  From gooseneck to the pin for the back stay is 31ft 9inches. From the same pin to the deck is 35ft. Boom is 12ft. I pulled the tape pretty tight but I’m sure I will be an inch or so out over official measurements. The forestay could be out a couple of inches because I don’t know how the mast was setup for rake etc but there is still leeway for adjustments in the bottle screws . Hope this helps

Offline

#4 2021-09-14 16:13:20

Allan_Poulter
Member
Registered: 2021-06-21
Posts: 10

Re: Sail Dimensions Victoria 30

I have found a blueprint from Chuck Paine on the boat that was done for a previous owner looking to convert the Victoria 30 to cutter rig. The actual boat is the Morris 30 but obviously Paine is using the same rig dimensions . I also have one with a bow sprit added if anyone wants a copy. The files are too big for this format but I would be happy to email them to anyone who is interested .

Offline

#5 2021-09-24 12:01:55

Duncan_Hill
Committee Member
From: Dun Laoghaire, Ireland
Registered: 2017-03-14
Posts: 110
Website

Re: Sail Dimensions Victoria 30

Allan, please contact me via web@victoriashadow.co.uk and I'll work out how the Association can host the files for members.


Blue Opal, Victoria 34

Offline

Board footer

Powered by FluxBB