You are not logged in.

#1 2022-05-26 21:58:38

Charles_Grossie
Committee Member
Registered: 2017-08-10
Posts: 162

Companionway canvas covers?

Hi folks,
I've been considering a canvas companionway cover for my Victoria 34 and wondered if anyone has installed one, which is practical and looks good too?
I contacted a reputable boat cover company in England during the week and they wanted to charge me two arms and three legs for the pleasure of making me a companionway cover. £320 plus VAT plus carriage. I thanked them very much, but declined their offer.
There are several YouTube videos showing you how to go about making your own cover, but obviously, you need a suitable sewing machine and the experience to go with it.
Here are a few examples of what seem to be mostly home-made covers. Some look good and some no so good.
1653598375_cover1.jpg
1653598395_cover2.jpg
1653598416_cover3.jpg
1653598448_cover5.jpg

Here is a professionally made one.
1653598487_cover4.jpg

Many thanks.
Charlie.


Victoria 34 Cutter - 'Anitra'

Offline

#2 2022-05-26 23:13:38

Jim_Thomson
Member
Registered: 2020-02-05
Posts: 19

Re: Companionway canvas covers?

1653605981_239dfb7f-eac2-4c3a-8008-6c7b1b0c35db.jpg1653603182_25bfc081-6f3b-4ffa-9777-ad81bf84f2af.jpegI’m afraid the pictures aren’t very good but we made our own. Material from Hawkhouse or Point North, they sell everything fabric related for boats. Use a denim needle in a standard sewing machine. If going through plastic use silicone spray.
Ours is detachable along the top having four spray hood style poppers (lift the dot marine fittings). It locks at the bottom with two turn buttons. I don’t remove it, prefer just to roll it up and trap it between the garage and the hatch if open. It’s great for damp days or recently when it was blowing old boots, I attached it at the bottom windward corner to prevent any stray waves splashing in (we had one!). It was also pretty good at night, saves putting the washboards in. 1653603114_c28ba31f-d05a-458c-a4bb-13b9c8d4bf9a.jpeg
You can see the poppers hopefully.

Last edited by Jim_Thomson (2022-05-27 00:01:17)


Nanooq
Victoria 30

Offline

#3 2022-05-27 00:17:58

Don_Smith
Member
From: Chester
Registered: 2017-06-25
Posts: 60

Re: Companionway canvas covers?

Charlie,

We have a companion way cover that rolls up onto the hatch lid when not in use, and uses some bungee to hold it down in the wind. I don't have a photo on this tablet but I'll send you one ASAP from my laptop.

Don
Triptych
V34 Conwy

Offline

#4 2022-05-30 14:06:18

Charles_Grossie
Committee Member
Registered: 2017-08-10
Posts: 162

Re: Companionway canvas covers?

Thanks very much for the photos and info guys.
Something to tackle myself, but will have to do some research and undertake some practice too before making the actual cover.  lol


Victoria 34 Cutter - 'Anitra'

Offline

#5 2022-05-30 22:46:46

Bill_Robinson
Member
From: Langkawi, Malaysia
Registered: 2021-06-14
Posts: 110

Re: Companionway canvas covers?

I intend to make two companion way covers for Inyoni, similar to the ones I have on my Ebbtide 36.
The first will be a drop down water resistant cover, this will be used in light rain.
The second will be an insect screen cover, which will extend horizontally from the opened sliding hatch, and then drop down. Both will attach to the aft edge of the companion way sliding hatch using studs, and the bottoms will be weighted using a sewn in, foam refrigerating insulating tube, filled with lead fishing sinkers.

Offline

#6 2022-06-07 20:47:14

Andrew_Gleadle
Member
Registered: 2014-09-23
Posts: 56

Re: Companionway canvas covers?

Hi Charlie

I made a cover a couple of years ago as I was fed up with rain coming in when going down wind. I fix it using 4 press studs fitted to the companion way and included a zip to make access easier.

I think the fabric is sunbrella fabric (I was given it about 10 years ago) and used a standard sewing machine with a Denim needle, as Jim suggested.

1654631045_20170621_213551.jpg

Not sure why the photo is rotated.

Andy

Offline

#7 2022-06-15 21:19:55

Murray_Fraser
Member
From: Weymouth
Registered: 2016-11-22
Posts: 87

Re: Companionway canvas covers?

1655324195_20220615_164238_2.jpg
1655324331_20220615_164224_1.jpg
This works very well but I have no idea who made it.  It rolls up and tucks above and behind the hatch, still attached by 3 press studs.

Last edited by Murray_Fraser (2022-06-15 21:21:09)


VICTORIA 800 Dulcibella

Offline

#8 2022-06-16 20:44:00

Duncan_Hill
Committee Member
From: Dun Laoghaire, Ireland
Registered: 2017-03-14
Posts: 153
Website

Re: Companionway canvas covers?

Andrew_Gleadle wrote:

Hi Charlie

Not sure why the photo is rotated.

Andy

Welcome to the magical world of mobile devices and how they take photos. I'll sort it out for you.


Victoria 34 Cutter - 'Blue Opal' (the non-bowsprit edition)

Offline

Board footer

Powered by FluxBB