#1 2017-08-18 14:13:40

Admin
Administrator
Registered: 2011-02-24
Posts: 346

Victoria 34 ANITRA

Charles Grossie writes:

Having sold my Biscay 36 Ketch (Mary Luck) to the only Irish Competitor in the forthcoming 2018 Golden Globe Race back in May this year, I decided to replace this excellent long-keeled ocean going yacht with ‘Anitra’ – a very nice and very capable V34 cutter which was hatched in 1990.

anitra.jpg

I had viewed ‘Anitra’ very briefly at Weir Quay Boat Yard (Bere Alston, River Tamar in Devon) in early June and decided she was for me. I had considered a few others too. Overall, she is in pretty good condition, but she does need some tidying up (like all boats do). I don’t have a full history of her ownership, but she had been owned by Linda and Scott Moss (who I don’t believe were members of the VictioriaShadow Association) from 2010 until this year. Prior to that, Gordon and Doreen Fraser owned her from 2004 and they were members of the Association. The original owner was a Mr A F Weller who owned her from new (original sales invoice exists). The original name of the V34 was ‘Tigger’ and it was Gordon and Doreen who renamed her ‘Anitra’.

‘Anitra’ (duck in Latin I am led to believe) has been based on the Devon and Cornwall coast all of her life. Going by the waypoints stored on the Raymarine chart plotter, she has cruised North and South Brittany, North Coast of Spain and the Scillies.

After relaunching ‘Anitra’ at Weir Quay mid-June, I spent the best part of a week getting her recommissioned and ship-shape in preparation for her trip back to Portrush in Northern Ireland. I had the help of a couple of good friends too which made it ‘fun’.
‘Anitra’ lies on her summer fore and aft moorings in Portrush harbour and will move up to Seaton’s privately owned Marina on the River Bann near Coleraine at the end of September, where she will be lifted out for the winter.

My impressions of the V34 are very good so far and the build quality is without question. It will take a while to get used to having a long fin and skeg again having sailed the long-keeled Biscay for almost 14 years.

Offline

#2 2017-08-30 12:31:32

Guy_Warner
Member
From: Petersfield Hampshire
Registered: 2015-06-07
Posts: 13

Re: Victoria 34 ANITRA

You will not regret your purchase. I bought my V34 cutter Ruby Star in Spring 2015. She also dates from 1990. She was formerly Victoria Vision and Kipper of London. During which time, she did the ARC and the Round Britain Race. I have made many improvements including making the inner forestay into furling rather than self-tacking with a 110% staysail sheeted on the yankee leads. The yankee sheets are now led back outside to turning blocks in the cockpit. This arrangement has worked well at all points of sail. I have inner tracks on the coach roof which I intended to use for the staysail but I found that the spreaders interfered too much  and the potential of the sail was better sheeted further outboard. I have recently returned from a splendid trip to the Vilaine river in South Brittany via Jersey. We had 4 on board and Ruby Star performed faultlessly. However, I sail a lot single-handed from my base in Port Solent. Please ask me any queries you may have. Guy

Offline

#3 2017-12-13 17:24:41

Charles_Grossie
Member
Registered: 2017-08-10
Posts: 19

Re: Victoria 34 ANITRA

I have many jobs yet to tackle this winter, but managed to remove all of the internal teak and holly floors last weekend. My garage has filled up nicely over the past few weeks.

The floors need to be carefully taken back to the veneer and then brought back nicely with lots of good varnish.

This should keep me busy over Xmas at least!

Offline

#4 2017-12-16 18:26:47

Guy_Warner
Member
From: Petersfield Hampshire
Registered: 2015-06-07
Posts: 13

Re: Victoria 34 ANITRA

Look forward to seeing you on the water next summer. Ruby Star is doing a Round Ireland cruise (westabout) in June/July. I think we are stopping at Rathlin Island on 6 July - not far from you>

Guy Warner

Offline

#5 2018-04-29 20:56:01

Charles_Grossie
Member
Registered: 2017-08-10
Posts: 19

Re: Victoria 34 ANITRA

Hi folks.
Preparation for this season continues and I still have plenty of jobs to complete.
I completely stripped the old varnish from all of the internal teak and holly floors and they are ready to refit.
The lovely teak wheel was also scraped back to the bare wood and re-varnished.
The canvas covers and spray hood are all a bit faded, but I came across a great supplier on Amazon.co.uk (The Scratch Doctor) who sells dyes in various colours - mainly for convertible cars - soft-tops in canvas. This product works very well and my faded dark ready canvas is now looking almost new!
I also scraped off all the old anti-fouling which had become flaky and unsightly and the whole bottom is now ready for two coats of International VC Tar.
I have ordered a new 3-bladed feathering Featherstream prop from the nice people at Darglow. I was very happy with the previous one I had fitted to my Biscay 36.

My V34 is the cutter version with the bow sprit fitted. I was curious as to the condition of the wood underneath the massively constructed stainless bow rollers and it took some time to remove same. I was shocked to find that the pine (Pitch pine?) immediately below the stainless bow roller fitting was very soft and on closer examination, it was 40% rotted close to the stem head. I can see where the moisture was entering on the top side of the bow sprit just in front of the bow roller assembly.
I have been stripping the fittings off and have also removed all of the fixtures (many through bolts). The bow sprit extends onto the foredeck by approx. 1m and I believe that it has been bonded in place too.
I was hoping to be able to remove the bow sprit intact as I want to use it as a template for a replacement, but this may not work out well. :-(
Just curious to know if anyone else with the same arrangement has experienced anything similar?
Also wondering if such a thing as an original drawing exists for the bow sprit?
Onwards and upwards as they say!

Fair winds.

Charlie.

Offline

#6 2018-04-30 08:00:11

Jon_Spencer
Member
Registered: 2003-11-23
Posts: 127

Re: Victoria 34 ANITRA

Charlie,
My Frances 34, ALBERTINE, suffered with similar problems with her bowsprit when she first came into our ownership.  We had the whole bowsprit removed as it was just through deck bolted and had a replacement made in laminated pine which after ten years shows no sign of wear although I do make a regular check of the underside.
I am not aware of any technical drawings, but would caution against their use as so many of the boats were almost bespoke in accordance with the first owners wishes.
Good luck with your replacement.
Jon.

Offline

#7 2018-05-08 12:46:47

Admin
Administrator
Registered: 2011-02-24
Posts: 346

Re: Victoria 34 ANITRA

Pictures of ANITRA's bowsprit as referred to in Charles Grossie's post

CIMG2414c.JPG
CIMG2417c.JPG
CIMG2418c.JPG
CIMG2419c.JPG

Offline

#8 2018-05-21 07:20:36

Charles_Grossie
Member
Registered: 2017-08-10
Posts: 19

Re: Victoria 34 ANITRA

I managed to get some time at the weekend to re-install the cutlass bearing housing complete with a new cutlass bearing.
Additionally, the new Darglow 'Featherstream' 3-bladed propeller (16" diameter) was successfully fitted.
Just awaiting the new bow sprit and I am almost ready for the water.

prop1.jpg
prop2.jpg
prop3.jpg

Offline

#9 2018-05-29 12:33:52

Admin
Administrator
Registered: 2011-02-24
Posts: 346

Re: Victoria 34 ANITRA

Charlie's latest update:

I finally managed to get the new bow sprit and all the fittings re-installed over three days. What a job!
Two planks of iroko were laminated before it was machined by CNC at my friend's factory.

The end result is very satisfying.
Ready for launching tomorrow.

bow1.jpg

bow2.jpg

Offline

Board footer

Powered by FluxBB